Quote:
Originally Posted by frank55a
1) Does the end with the smaller step go towards the top or the bottom? BOTTOM
2) Do I install these from the bottom and push them up, or from the top and push them down? Top and push them down. You should have a special mandrel so you do not mushroom the top. When installed you may need to ream the guide.
3) And how do I know when they're all the way "in"? The top of the guide should be flush with the block.
|
Reviving an old thread - this is the exact problem I've been trying to find (lord, google is your friend *and* enemy!)
SO from the head side, drive them in, small ID first, until the top (larger OD) end is flush with the bottom of the valve cavity?