The Ford Barn - View Single Post

duke36 · 05-31-2018, 06:34 PM

These manual boxes have recirculating ball sector gears rather than the 2 tooth or 7 tooth
stock gears, and if not mistaken, like other boxes made by Gemmer and others from the '30's on, there are only 2 adjustments. One is the sector side screw and the other are shims at the lower cover . No need to remove the housing such as for the 2 tooth eccentric adjustment.

05-31-2018, 06:34 PM	#24
duke36 Senior Member Join Date: Jun 2015 Posts: 1,414	Re: F100 Steering by Randy These manual boxes have recirculating ball sector gears rather than the 2 tooth or 7 tooth stock gears, and if not mistaken, like other boxes made by Gemmer and others from the '30's on, there are only 2 adjustments. One is the sector side screw and the other are shims at the lower cover . No need to remove the housing such as for the 2 tooth eccentric adjustment.