The Ford Barn - View Single Post

Patrick L. · 06-06-2015, 05:38 AM

Yes, it should go on the top for both reasons. But, it won't add very much caster. Make sure the rod to axle attachment is tight/correct also. Caster should be around 5º.

06-06-2015, 05:38 AM	#3
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Radius ball shim Yes, it should go on the top for both reasons. But, it won't add very much caster. Make sure the rod to axle attachment is tight/correct also. Caster should be around 5º.