The Ford Barn - View Single Post

Herb Concord Ca · 05-15-2021, 08:44 PM

The horn motor should be isolated from ground. You can't measure between the two horn terminals with an ohmmeter, you will always get a reading, this is normal. Either horn terminal to ground should be an open circuit.

05-15-2021, 08:44 PM	#3
Herb Concord Ca Senior Member Join Date: May 2010 Location: Concord CA Posts: 637	Re: Horn Help The horn motor should be isolated from ground. You can't measure between the two horn terminals with an ohmmeter, you will always get a reading, this is normal. Either horn terminal to ground should be an open circuit.