The Ford Barn - View Single Post

Jim Brierley · 03-26-2020, 11:50 AM

I'm not sure of exactly what Snyder's sells with their serpentine belt, a system? At least part of the HP gain is from the extra flexibility of that belt, more flexible = easier to turn the gen & fan. I've been involved in dyno testing of performance A's, one time we took the belt completely off and I turned the water pump with a hand drill while a dyno run was made. From memory that was 3 HP. Don't recall if it had a serpentine or not?

03-26-2020, 11:50 AM	#11
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,089	Re: Serpentine belts I'm not sure of exactly what Snyder's sells with their serpentine belt, a system? At least part of the HP gain is from the extra flexibility of that belt, more flexible = easier to turn the gen & fan. I've been involved in dyno testing of performance A's, one time we took the belt completely off and I turned the water pump with a hand drill while a dyno run was made. From memory that was 3 HP. Don't recall if it had a serpentine or not?