The Ford Barn - View Single Post

Bill OH · 05-26-2014, 12:08 AM

I have used a dual point dist on a 53 Ford. Two suggestions: Sticking valves - try MMO down carb Venturi and two dist cap cracked or contains moisture. I have experienced all of these conditions - result is rough engine.

05-26-2014, 12:08 AM	#44
Bill OH Senior Member Join Date: May 2010 Posts: 426	Re: Old problem revisited, rough running 8BA I have used a dual point dist on a 53 Ford. Two suggestions: Sticking valves - try MMO down carb Venturi and two dist cap cracked or contains moisture. I have experienced all of these conditions - result is rough engine.