Thread: Oil pan baffle
View Single Post
Old 02-03-2019, 02:20 PM   #11
Joe K
Senior Member
 
Joe K's Avatar
 
Join Date: Jul 2010
Location: Cow Hampshire
Posts: 4,188
Default Re: Oil pan baffle

Quote:
Originally Posted by dbaldwi3 View Post
Thanks for all the replies and advice. After getting the baffle out and cleaning up all the sludge I’ve moved onto disassembling the oil pump which was in remarkably good shape bushings and all. The plan is to reassemble everything back into car tomorrow.
Now that you've removed the sludge, you sort of get a choice to go back with original non-detergent oil and continue periodically cleaning the pan, or detergent oil in your grade/viscosity.

Keep in mind the oil galleries and valve chamber are not cleaned - detergent oil in this area will eventually lift the sludge from there and everywhere else to end up IN your oil or at least a thinner coating of sludge on the motor interior generally. That is the point of detergent oil.

After converting to detergent oil (should you go this way) 3 changes of oil at usual intervals will mostly clean out the rest of the engine to where you need not worry.

Or, forgo a change. You can continue to drop that pan. It works.

There are adherents to both theories of operation.

Joe K
__________________
Shudda kept the horse.
Joe K is offline   Reply With Quote