View Single Post
Old 01-19-2021, 02:37 PM   #1
runewilliam_merc
Junior Member
 
Join Date: Aug 2018
Posts: 28
Default Wheels (rims?) For my 1952 Mercury

Hello! I have a 1952 Mercury that I plan to participate in a track race with this spring.
I don't want to shred my whitewalls, so I have got some used 215/70-15 tires that I plan to use.
The problem is that I cannot find any wheels (rims?) That I think fits AND looks decent.

I have checked Summit Racing, where I found a wheel that looked ok, but the backspacing was too little. I found a wheel that I think Will for, but I an not convinced that I Will like the look of all the round Holes.

Have any of you a suggestion what wheels that Will fit and where to buy?

The original wheels Are 15x5.5 with 5x 4.5 bolt pattern and 4" backspacing.

I want 15x6 with 5x4.5 bolt pattern and 4.5" backspacing to clear the rear wheelwells.

I am from Norway, so please don't be picky on my writing [emoji28]

Rune from Norway

By the way: my car is on the first page of the Norwegian 2021 vintage car rally/racing rulebook [emoji106]

Sent fra min S52 via Tapatalk
runewilliam_merc is offline   Reply With Quote