The Ford Barn - View Single Post

Hal Beatty · 06-13-2021, 02:42 PM

Front SKF 6208, Rear SKF 6306.

Use the snap rings from the old bearings as modern ones are too thin and will allow the shafts and bearings to move in the housing.

I got sealed bearings and removed the seals from the side of the bearings facing in... left the outer seals in place.

06-13-2021, 02:42 PM	#3
Hal Beatty Senior Member Join Date: Jul 2012 Location: Bellingham, WA Posts: 213	Re: 39 Trans rebuild Front SKF 6208, Rear SKF 6306. Use the snap rings from the old bearings as modern ones are too thin and will allow the shafts and bearings to move in the housing. I got sealed bearings and removed the seals from the side of the bearings facing in... left the outer seals in place.