[Dick Carne]

Thanks Kevin - I had pretty much concluded that the right angle turn in the metal tube would empty out along the bottom of the upper windshield garnish molding, but I'm still not sure how the metal tube fits into the door post, and where it might empty out at the bottom. I seem to recall that there is a raised flange along the outer edge of the door post garnish molding, and could probably channel the tube along that inside edge of the door post ... but where does the metal tube go from there? We did most of the restoration work on this at my nephew's, and he thought that he had found the original tubing with attachments when I called him the other day. Unfortunately he is out of town until the weekend, so I can only guess at this point without the original part to "guide" me. You have been a tremendous resource for me on this project, and I very much appreciate your counsel and guidance. Thanks again.