Quote:
Originally Posted by FRANK PKNY
At TDC the intake valve is open indicating to me the cam gear is not in time. The crankshaft gear has no dimple on it I wonder if it's installed backwards? I thought all crankshaft gears had a factory mark on them. The builder put his own marks on with a marker pen , I believe he miss calculated the cam to crank position. I do see a factory mark on the fiber cam gear which at present is way off from TDC in the crank gear. is it possible to put
the crank gear on backwards?
|
Check out the thread in this link. If the crank gear is on backwards
the valve timing will be off, see the picture on page 7 post 132.
https://www.fordbarn.com/forum/showt...ght=crank+gear