[JSeery]

I'll have to look, but the parts are all interchangeable if you have the F100 backing plates and hubs. I attached a pdf file on this modification using F1 parts. Most of the parts are the same, but be sure you pay attention! (not all of the photos used in the attachment are original with me!!)

Update:
Wheel Cylinders
F100 65-67 Raybestos WC37083 / WC37084
F100 53-67 Centric 13468012 / 13468011
F100 53-60 NAPA UP9091 / UP9090

Front Brake Hose
F100 53 Dorman H1146 18 inches
F100 53-60 Centric 15068007 16 inches


Brake Shoes
F100 53-66 Raybestos 228PG 2 x 11
F100 53-66 Bendix 228
F100 53-66 Centric 11102280
F100 53-66 NAPA TS10A UP10AR

Spring/HW Kit
F100 53-67 Carlson H7144

Adjustor Kit
F100 64-76 Carlson H2540 / H2541
F100 64-76 Raybestos H2540 / H2541
F100 64-76 NAPA UP80691 / UP80690

F100 Outer Hub Bearing TIMKEN 09067
F100 Outer Hub Race TIMKEN 09195
Inter Hub Bearing TIMKEN 14116 (requires modification)
Inter Hub Race TIMKEN14276
Seal National 450461

I'm sure other parts will work, but these are the numbers I have.