The Ford Barn - View Single Post

J Franklin · 06-04-2013, 11:50 PM

OK I'll confess, I run a brumfield 6-1 head, 100 overbore, B distributor, B cam, closely balanced engine with clutch and flywheel balanced by Edelbrock. 3:77 rear. That's all. I have a early cam to install if it ever gets opened up. That is the same configuration I had in another engine, 60 over (with an early cam) and could run the L.A. freeways, back when they weren't stop and go, easily.

06-04-2013, 11:50 PM	#11
J Franklin Senior Member Join Date: May 2010 Location: Oregon Posts: 5,959	Re: who's running what OK I'll confess, I run a brumfield 6-1 head, 100 overbore, B distributor, B cam, closely balanced engine with clutch and flywheel balanced by Edelbrock. 3:77 rear. That's all. I have a early cam to install if it ever gets opened up. That is the same configuration I had in another engine, 60 over (with an early cam) and could run the L.A. freeways, back when they weren't stop and go, easily. Last edited by J Franklin; 06-05-2013 at 01:26 AM.