The Ford Barn - View Single Post - Toe-In Lesson Learned

Bob Bidonde · 09-10-2020, 10:45 AM

Measuring 1/32" to 1/16" between front wheels and or tires makes no sense to me as both the wheels and tires usually have run-outs more than 1/16". The Model "A" that was 8 degrees out needed 4 turns of the tie rod to get back into spec.

09-10-2020, 10:45 AM	#13
Bob Bidonde Senior Member Join Date: May 2010 Location: Long Island, NY Posts: 3,470	Re: Toe-In Lesson Learned Measuring 1/32" to 1/16" between front wheels and or tires makes no sense to me as both the wheels and tires usually have run-outs more than 1/16". The Model "A" that was 8 degrees out needed 4 turns of the tie rod to get back into spec. __________________ Bob Bidonde