04-11-2016, 09:33 AM
|
#5
|
|
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: Boyce MotoMeter Mounting Nuts & Fine Screw Threads
Quote:
Originally Posted by 1wonton
I made the brass nut for my mm on my screw lathe.
|
Wonton,
Are they a common diameter & thread pitch? I had a BIG "Universal" MOTO-METER on Minerva & it already had 2 nuts on it I just cleaned it up & it worked PERFECT
At swap meets, just test them with a BIC lighter. If the RED separates on the car, cover part of the radiator, when the red connects to the upper RED, it'll be like new!
TIP#181: If it cycles UP & DOWN regularly every 2 minutes or so, while cruising steady, YOU'RE LOW ON WATER!!!!
Bill W.
__________________
"THE ASSISTANT GURU OF STUFF"
|
|
|