View Single Post
Old 04-14-2021, 07:44 PM   #1
Pg409
Junior Member
 
Join Date: Jun 2020
Location: Prince George BC Canada
Posts: 11
Default Pitman arm clocking

Hi guys....just had the steering box rebuilt on my 48 Canadian Merc pass car. As I understand it the steering woodruff key should point straight up and the pitman arm should point straight down . My steering wheel is way off centre by say a third. With the wheel in correct straight ahead position the pitman arm points slightly to the drivers side. I realize the drag link can be adjusted shorter but is the pitman arm not in its correct location? Thanks.
Pg409 is offline   Reply With Quote