Re: Diamond Back Bias Ply looking radials
Folks just mounted new diamond back Auburns as noted difficulty mounting narrow beads to inflate. The following word very well and almost no cost. purchase a 16”bicycle inner tube at Walmart $6 bucks. After tire mounted on rim. Tire lube stuf very liberally. Stuff The 16” bike tire in the top of the rim lip. Keep slippery inflate the bike tube jut till it fills the gap. Inflate the tire valve out the side. Inflate the tire which is now holding air as it is being filled. Thbike innertube will squeeze out of the wheel. Don’t be shy after bead comes up pull out the bike tube whil filling the tire fully. Works great. Use bike tube for your size rim. 16” etc Stuff into rim evenly keep it slippery you will figure it out good luck!!
|