[30 Closed Cab PU]

Originally Posted by mass A man

I switched over to all LED's in the A, I do like the very low amp draw now at night. I hear that the Logo Lights are actually 8-12 volts, so at low RPM's or a low setting on 3rd brush, the lights will flicker, trying to stay lit. You may want to investigate this yourself.

Thanks for the info, my logo lights do flicker some at lower speeds. I put up with it, figured I must have poor connections somewhere, never took the time to investigate. When I bought them thought I had read they worked down to 6 volts, but not sure now.