Quote:
Originally Posted by Gary Karr
The windshield upper hinge is not screwed into the wood header. It is attached to the steel header by six screws, lock washers, and nuts. You will need to remove the upholstered header cover to gain access to the nuts. You should have someone assist you in holding the windshield in place as you remove the screws. As mentioned above, you may want to remove the visor as well to give yourself a little more space to work with. When you go to reinstall the windshield, use only some friction tape between the upper hinge and header. The rubber gasket sold by many suppliers is not correct for your car.
|
Gary has it right...follow his instructions...not the 30-31 way...two different assemblies.
Pluck