Re: Rumble Seat Help
Quote:
Originally Posted by TMarsh
That is correct, but in can be a PITA. I ended up securing mine with plastic ties around spring and to rumble lid. Works great and you cant see it.
|
Quote:
Originally Posted by 1931 flamingo
Take the back cushion out, look at the bottom frame of the cushion, there should be two "holes". Now look at the bottom of the deck lid, there should be 2 "D" nuts that take two bolts thru the 2 "holes". Install the seat as you usually do and insert the lower bolts and tighten. FWIW This is if I've remembered correctly.
Paul in CT
|
Sounds like a job for one of my grandson's with gramp's supervising, they're a lot more limber than this o'l guy. Thanks for the help.
__________________
"I'd rather be sitting in my A Model thinking about God, then in church thinking about my A Model."
|