Quote:
Originally Posted by Synchro909
With no cutting of the chassis, this might be a goer here so long as a bell housing can be found for RHD.
|
The AA Bellhousing has no shaft for the brake and clutch. (It's on the A Bellhousing)
The Brake and Clutch Pedal Shaft must be fabricated when installing the F150 in a Model A.
So, installing in a Right Hand Drive Model A would also require fabricating a Brake and Clutch Pedal Shaft.
The next issue would be reversing the Clutch Release Shaft on the AA Bellhousing to make it operate with the Right Hand Clutch pedal.
I have not done this conversion in a Right Hand Drive car but it appearss to be do-able.??