Quote:
Originally Posted by 46HARLEY
Thanks for all the responses. Could you tell me some more about this Allen wrench process. I have it soaking in acetone and Marvel, would love to get it to move without taking it apart. If I have to I will start with just the intake. Thanks Larry
|
The idea with the hex key is that the side of the head of the valve can be seen thru the spark plug hole. It is best to hit the top of the valve in its center to not bend the valve.
This can be done by inserting a hex key (bigger the better) so as to have the short end over the valve, with slight tilt.
Karl