The Ford Barn - View Single Post

Ray in La Mesa · 07-13-2021, 08:58 AM

Sometimes the strap hangs up on the cardboard insulation on either side of it inside the switch if the cardboard is warped. Pull the switch to check, it can be disassembled to replace. the cardboard or wet it & straighten & set to dry.

07-13-2021, 08:58 AM	#3
Ray in La Mesa Senior Member Join Date: May 2010 Location: La Mesa Ca Posts: 1,166	Re: Starter stuck in on position Sometimes the strap hangs up on the cardboard insulation on either side of it inside the switch if the cardboard is warped. Pull the switch to check, it can be disassembled to replace. the cardboard or wet it & straighten & set to dry.