The Ford Barn - View Single Post

Bruce Newbery · 04-18-2014, 11:19 AM

Thanks for the information. The floor pans were new. I lightly sandblasted them. There was no oil on them. The first time I used the Miracle paint I put it on the bare metal with a brush. I got air bubbles and I thought it was to thick. I only did the bottom side so if I had bubbles it would not show, Next I took another small panel and tried it with grease and wax remover. I still have bubbles. this Miracle paint is like POR15 Please let me know if any of you have used the Miracle paint and what were your experiences. I also called Bill Hirsch tech people and they have never experienced this before.
, this product is not PPG. It is like POR15

04-18-2014, 11:19 AM	#7
Bruce Newbery Member Join Date: May 2010 Location: Williams Lake B.C. Canada Posts: 50	Re: Bill Hirsch Black Miracle paint. Thanks for the information. The floor pans were new. I lightly sandblasted them. There was no oil on them. The first time I used the Miracle paint I put it on the bare metal with a brush. I got air bubbles and I thought it was to thick. I only did the bottom side so if I had bubbles it would not show, Next I took another small panel and tried it with grease and wax remover. I still have bubbles. this Miracle paint is like POR15 Please let me know if any of you have used the Miracle paint and what were your experiences. I also called Bill Hirsch tech people and they have never experienced this before. , this product is not PPG. It is like POR15