Re: Bell housing
28-29 shift levers have a 15 deg bend in them.
30-31 shift levers have a 20 deg bend in them, moving the shift lever further away from the dash.
Sounds like, in addition to the bell housing, the transmission top or lever was also changed.
I'm at a loss to understand "Pedals don't fit the holes". If it was an early bellhousing with smaller dia shafts, pedals would also need to be changed.
I think we need additional information as to what was replaced vs what was rebuilt (like the issue with the transmission shift lever or top). Is this an early housing? Have the pedals been replaced? Are the stops on the pedals properly mating? Are the floorboards correct?
|