The Ford Barn - View Single Post

Oldbluoval · 09-25-2020, 07:31 AM

Like John, I’ve used DP 90 cut with thinner. Works fine
I don’t know about upper body wood for sure as I’ve never found much in original wood to go by. The sills were treated with a product (or similar) to Gilsonite which is an asphalt derivative cut with thinner.. you’d think it to be tacky.

09-25-2020, 07:31 AM	#7
Oldbluoval Senior Member Join Date: Jun 2015 Location: Signal Mtn, TN (SE TN) Posts: 2,372	Re: Finishing the Belt Rail on 68C Cabriolet Like John, I’ve used DP 90 cut with thinner. Works fine I don’t know about upper body wood for sure as I’ve never found much in original wood to go by. The sills were treated with a product (or similar) to Gilsonite which is an asphalt derivative cut with thinner.. you’d think it to be tacky.