Quote:
Originally Posted by Veeder
All sheet metal is in place and I can't say I have a huge issue with heat but from what I've determined so far the cooler I can keep the distributor coil (both skip Haney rebuilds and other coils the better off I will be. As for the radiator had it record a few years ago and also added the enhanced design water pumps that Skip Haney sell all have added some improvement.
As stated sheet metal in the correct places makes a huge difference in air flow.
|
Ok, this is interesting. What temperature is your engine running at? And what are you calling hot? The hotter the engine runs the better it is for the engine (short of boiling over). But the under hood temperature can be an issue, so like everything it is a compromise. Unless you are having a coil problem I'm not sure why you are concerned about coil temperature.