04-07-2021, 09:02 PM
|
#17
|
Senior Member
Join Date: Oct 2012
Location: Eastcoast
Posts: 864
|
Re: How to repair damage to a deck
Quote:
Originally Posted by Doublepumper
I'm thinking epoxy won't take the heat in that area and will eventually fail. Silver solder doesn't work well for a filler. Brazing with bronze rod may be the best method to fill it without imparting too much heat and distortion. That's a tough spot, due to the uneven thickness and hole edge. Good preheat and slow cool will be the most important things for success.
Good luck!
|
Okay thanks
|
|
|