View Single Post
Old 11-22-2020, 11:18 AM   #6
katy
Senior Member
 
katy's Avatar
 
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,046
Default Re: oil lube circuit

Sponsored Links (Register now to hide all advertisements)
Quote:
Gravity: the oil,pumped up to the valve chamber trickles down tubes to the main bearings and cam bores.The hydrodynamic principle lifts the crankshaft on a cushion of oil. Gravity volume is high enough for the low rpm engine.splash also occurs in the valve chamber..
There is also an "oil return" tube that returns excess oil from the rear of the valve chamber to the lower front of the block, where the oil flows into the dipper tray.

Also note that the engine sits on a slope of 3° towards the rear.
__________________
If you don't hear a rumor by 10 AM, start one!.
Got my education out behind the barn!

Last edited by katy; 11-22-2020 at 11:20 AM. Reason: Addition
katy is offline   Reply With Quote