The Ford Barn - View Single Post

Jacksonlll · 09-18-2020, 01:00 PM

Connect a jumper cable between the neg batt post and the starter. Assuming you are pos ground. Try it. You may have high resistance in the neg batt cable. Easy to try.

09-18-2020, 01:00 PM	#7
Jacksonlll Senior Member Join Date: Jul 2012 Location: Michigan-- Member of Oakleaf of MARC Posts: 1,686	Re: Starter failure Connect a jumper cable between the neg batt post and the starter. Assuming you are pos ground. Try it. You may have high resistance in the neg batt cable. Easy to try.