Thread: Spark Question
View Single Post
Old 07-26-2020, 11:40 AM   #20
Senior Member
Join Date: Jun 2010
Location: DFW Area
Posts: 149
Default Re: Spark Question

ok guys - back from vacation. New Coil and new coil wire came in
I have checked all connections, all have voltage. Checked with a light and ohm meter

i get power to lower and upper plate - but the problem is it does not appear to be going to the points (Open or closed)

This is a new set of points etc; modern version with condenser up top, from NuRex

so what could the problem be. The lower plate looks fine, no corrosion etc
txmike is offline   Reply With Quote