Thread: Spark Question
View Single Post
Old 07-05-2020, 12:45 PM   #6
Patrick L.
Senior Member
Patrick L.'s Avatar
Join Date: May 2010
Location: Upstate NY and western Florida
Posts: 5,882
Default Re: Spark Question

Sponsored Links (Register now to hide all advertisements)
There should be battery voltage at terminal box connections, primary coil connections.

1.5 ohms across coil primaries.

The primary lead could be bad or screwed into the distributor too far causing it to ground. The switch could also be bad but is easily checked.

Coil should be connected to points the same as the battery. If + grd battery, + on coil should go to points. [ but if different it'll still run]
Patrick L. is offline   Reply With Quote