Thread: Spark Question
View Single Post
Old 07-05-2020, 11:48 AM   #3
Patrick L.
Senior Member
Patrick L.'s Avatar
Join Date: May 2010
Location: Upstate NY and western Florida
Posts: 5,876
Default Re: Spark Question

1. Set points to .022"
2. Set timing [ use pin]
3. Check for 6v at open point arm
4. 0v at closed point arm
5. Place secondary coil wire near 1/4" from good ground
6. Open/close repeatedly point arm [ key on] and look for spark

Let us know results
Patrick L. is offline   Reply With Quote