The Ford Barn - View Single Post

Terry,OH · 10-26-2021, 07:02 AM

Appears the vertical portion of the door is bent and interfering with the screen. It should have been bolted to the hinge in four places and is not. I also suggest you take the inside portion apart to see if you can get it straightened out. The screen already has a hole in it so don't be afraid of damaging it since it is reproduced and common to the 40

10-26-2021, 07:02 AM	#11
Terry,OH Senior Member Join Date: May 2010 Posts: 4,751	Re: 1939 Ford Vert Cowl Vent will not budge Appears the vertical portion of the door is bent and interfering with the screen. It should have been bolted to the hinge in four places and is not. I also suggest you take the inside portion apart to see if you can get it straightened out. The screen already has a hole in it so don't be afraid of damaging it since it is reproduced and common to the 40