Re: load-o-matic - (CAPITALIZATION OPTIONAL ON MY BROWSER)
Examples of the two styles of '57+ distributor breaker plates I'm familiar with...
'57/'59... the breaker plate is round and pivots on a circle of ball bearings around the outer edge.
The operating arm from the vacuum canister is flat and straight. photos 1 & 2
'59+... the breaker plate is fairly angular and pivots on a small pin, the red arrow in photo 3.
The operating arm from the vacuum canister is nearly flat and has two curves.
Last edited by dmsfrr; 09-22-2021 at 11:55 PM.
|