The Ford Barn - View Single Post

Ol' Ron · 09-20-2020, 07:18 AM

I don't see this as an issue. The bushing is hardened and so is the pushrod, and there isn't any oil lost by this condition as the bleed hole is very small. Unless you have a New bushing and pushrod, you can't define "loose" aS THE PUSHROD IS A ROCKER ARM.

09-20-2020, 07:18 AM	#9
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,881	Re: 8BA fuel pump pushrod diameter I don't see this as an issue. The bushing is hardened and so is the pushrod, and there isn't any oil lost by this condition as the bleed hole is very small. Unless you have a New bushing and pushrod, you can't define "loose" aS THE PUSHROD IS A ROCKER ARM.