View Single Post
Old 09-19-2020, 06:07 PM   #2
Senior Member
51woodie's Avatar
Join Date: Apr 2018
Location: Chelmsford, ON Canada
Posts: 313
Default Re: gas pedal linkage 46 48 v8

Mike. The pedal rod, 9727, "snaps" into the cavity on the underside of the gas pedal, and goes through the firewall into the engine compartment. That rod connects to a spring loaded (throttle return) cross shaft 9725, that bolts to the firewall above the bellhousing. Another rod 9747, connects the cross shaft to the carb throttle. The rods have "spring loaded ends that lock on the ball ends of the respective connections, and there are rubber insulators P/N 91A-9714-A, that go over the ball ends.
Attached Images
File Type: jpg Flathead_fuelsystm_1942-46car.jpg (84.3 KB, 38 views)
51woodie is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)