Quote:
Originally Posted by JSeery
When you are running the jumper to the battery you are connecting it to the grounded side of the battery, correct? They just jumping the terminal on the solenoid to ground, that will energize it.
|
I can run the jumper wire from the small center post on the solenoid to the battery side of the solenoid and get it to turn over. I also pull the push button out of the dash with the wire connected to it and run a jumper from the (-) side or power side of the battery to the back of the switch and get it to turn over......When I tried the (+) or ground side to the push button switch, NOTHING!!!!! Which doesn't make sense to me??? AS I thought that "grounding" the wire would make it turn over!!!! SO again, I know my issue is at the push button switch somewhere somehow