The Ford Barn - View Single Post - Purchased my first A

WHN · 07-07-2017, 07:05 PM

Getting the tank off is not a big job and if you take your time you could save the paint.

Two coats of slosh should do the trick. Seals leaks, rust, and other small problems. If done right, it really works. Rivets will be sealed from the inside, not soldered from the outside.

We have done a number of cars, all with great results. Easy. We also leave correct column support.

It works.

07-07-2017, 07:05 PM	#7
WHN Senior Member Join Date: Mar 2017 Location: Connecticut Shoreline Posts: 1,828	Re: Purchased my first A - 1929 Tudor Getting the tank off is not a big job and if you take your time you could save the paint. Two coats of slosh should do the trick. Seals leaks, rust, and other small problems. If done right, it really works. Rivets will be sealed from the inside, not soldered from the outside. We have done a number of cars, all with great results. Easy. We also leave correct column support. It works.