The Ford Barn - View Single Post

modeleh · 01-14-2019, 08:30 AM

Thank you Ron and Pete, I was hoping that you guys would comment, I really appreciate the advice you offer on this forum. I’m going to try them first on a 255 with a Schneider s-100 and edelbrock with four 81s. The block is relieved so that would help to diminish CR slightly. I will cc them, clay, adjust plug depth as suggested. Cheers.

01-14-2019, 08:30 AM	#8
modeleh Senior Member Join Date: May 2010 Location: Nanaimo BC Posts: 242	Re: Weiand 8.75 Heads Thank you Ron and Pete, I was hoping that you guys would comment, I really appreciate the advice you offer on this forum. I’m going to try them first on a 255 with a Schneider s-100 and edelbrock with four 81s. The block is relieved so that would help to diminish CR slightly. I will cc them, clay, adjust plug depth as suggested. Cheers. Last edited by modeleh; 01-14-2019 at 08:46 AM.