The Ford Barn - View Single Post

03-30-2005, 06:49 AM

Try John McLaren, I believe he designed the quadrasteer system for Chevy.

Phone/Fax:

231-238-9080

New Wire Wheels and Rims for your Model T

John McLaren, being an old car enthusiast and owning a Model T since the age of 16, searched for many years for a good set of wire wheels for an original 1913 Ames Racer (pictured left). Upon locating an original set of universal wire wheels, he was intrigued with the design. The universals did not need a special wheel center for mounting. The wheels that he manufacturers today are a redesign of those original universal wire wheels. due to a hgh standard of quality, this has led McLaren Manufacturing to start production of their own rims and accessories. All materials are manufactured in the U.S.A. and assembled in the State of Michigan. Over 100 sets of these wheels are on the road today!

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

WHEELS

McLaren Wire Wheels replace wooden spokes from the old Model T wheel. Wheels are interchangable front or rear. New Wire Wheel mounts onto Model T Wheel Hub Center, no special wheel center is needed. R I M S

McLaren Rims are made to Ford’s specifications for wood felloes, these are the only rims Ford will use in the 21st Century!

Over 100 sets all ready on the road!

--------------------------------------------------------------------------------

McLaren Manufacturing, Inc.

3581 Greenmans Point Road

Cheboygan, MI 49721-9744 Phone/Fax: 231-238-9080

Email: [email protected]

Contact John McLaren to order

03-30-2005, 06:49 AM	#2
Guest Posts: n/a	Re: STEERING TOO SENSITIVE Try John McLaren, I believe he designed the quadrasteer system for Chevy. Phone/Fax: 231-238-9080 New Wire Wheels and Rims for your Model T John McLaren, being an old car enthusiast and owning a Model T since the age of 16, searched for many years for a good set of wire wheels for an original 1913 Ames Racer (pictured left). Upon locating an original set of universal wire wheels, he was intrigued with the design. The universals did not need a special wheel center for mounting. The wheels that he manufacturers today are a redesign of those original universal wire wheels. due to a hgh standard of quality, this has led McLaren Manufacturing to start production of their own rims and accessories. All materials are manufactured in the U.S.A. and assembled in the State of Michigan. Over 100 sets of these wheels are on the road today! -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- WHEELS McLaren Wire Wheels replace wooden spokes from the old Model T wheel. Wheels are interchangable front or rear. New Wire Wheel mounts onto Model T Wheel Hub Center, no special wheel center is needed. R I M S McLaren Rims are made to Ford’s specifications for wood felloes, these are the only rims Ford will use in the 21st Century! Over 100 sets all ready on the road! -------------------------------------------------------------------------------- McLaren Manufacturing, Inc. 3581 Greenmans Point Road Cheboygan, MI 49721-9744 Phone/Fax: 231-238-9080 Email: [email protected] Contact John McLaren to order