[Kurt in NJ]

There was a engine without head a few booths away at Hershey a couple years ago, every I ever I walked by it called to me ( I don’t need more engines) I looked at it several time, the bores were small enough that .020 bore could be possible, the water jacket was never rusty, the outside was never rusty, the engine number is not being used on any motor vehicle databases, upon disassembly the camshaft bearing bores still have machining marks and are in the middl of factory sizes, no cracks or damaged stud threads —#3 cleaned up at .023, the others would clean up at under .020, the valve seats will not need replace because of being ground too much, —- so what would be the value of a block like this.