The Ford Barn - View Single Post

jak · 06-16-2021, 01:31 PM

remove the distributor, and stick a long straight blade screwdriver down through
the head. Rotate the lower shaft with the screwdriver and see if you have the lower shaft 180 degrees off of the oil pump drive gear.

06-16-2021, 01:31 PM	#2
jak Senior Member Join Date: Sep 2010 Location: Maryland Posts: 279	Re: Distributor won't drop in fully... remove the distributor, and stick a long straight blade screwdriver down through the head. Rotate the lower shaft with the screwdriver and see if you have the lower shaft 180 degrees off of the oil pump drive gear.