The Ford Barn - View Single Post

Mike Peters · 11-28-2020, 10:56 PM

The two tooth Gemmer steering sector was used interchangeably from Feb. 1929 along with the 7 tooth sector to the end of 1929. It was 1 inch shorter than the 30-31 steering column. For 1929, the steering shaft for the two tooth Gemmer sector was 43" long. the 30-31 steering was 44" long.
So yes, the two tooth sector can be used without modification if it is the shorter 29 version.

11-28-2020, 10:56 PM	#2
Mike Peters Senior Member Join Date: Aug 2012 Location: South East Wisconsin Posts: 1,279	Re: Two tooth setting in a 28/29 The two tooth Gemmer steering sector was used interchangeably from Feb. 1929 along with the 7 tooth sector to the end of 1929. It was 1 inch shorter than the 30-31 steering column. For 1929, the steering shaft for the two tooth Gemmer sector was 43" long. the 30-31 steering was 44" long. So yes, the two tooth sector can be used without modification if it is the shorter 29 version.