Thread: Insert bearings
View Single Post
Old 02-01-2017, 12:47 PM   #24
Dave in MN
Senior Member
 
Dave in MN's Avatar
 
Join Date: May 2010
Location: Jordan, MN
Posts: 1,411
Default Re: Insert bearings

Quote:
Originally Posted by modelAtony View Post
Dave , when I would play with timing I would always go out on Interstate and open it up a little, I would always run a 2 mile hit and my buddy would always run the stop watch. The fastest I would ever go was 88 mph , one day Dennis said, was that the fastest i had ever ran ? I said yes but I had about another 1" OF THROTTLE LEFT. I said lets see what I got , Good clear Sunday no wind so we started my 2 mile run at about 55 mph. 2 mile he hit the stopwatch after pulling over I figured the time and I said, Holly Shit Dennis that's 96 MPH. Wednesday morning I was at automotive shop on dyno . 2900 rpm, 96 mph, 117 lbs torque and 65 HP .
Tony, Great stories...thanks for sharing. I have one more for you...on my Phaeton run of a tank full at 78 mph, I noticed the ride/car got real smooth and the steering very easy at 75 mph. It was like it was riding on air and I think it was. Like you, I also had a bit more pedal but unlike you, no reserve on the nerve.
Have a great day!
Dave in MN is offline   Reply With Quote