The Ford Barn - View Single Post - Installing Model A Ford == D == Shaped Nuts

Mike V. Florida · 05-09-2010, 05:15 AM

I'm sure out there somewhere there is a tool but I think most weld them in.

You can also peen the edge over with a small ball peen hammer and a heavy weight to keep the sheet metal from deforming.

05-09-2010, 05:15 AM	#2
Mike V. Florida Senior Member Join Date: May 2010 Location: South Florida Posts: 14,054	Re: Installing Model A Ford == D == Shaped Nuts I'm sure out there somewhere there is a tool but I think most weld them in. You can also peen the edge over with a small ball peen hammer and a heavy weight to keep the sheet metal from deforming. __________________ What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II Last edited by Mike V. Florida; 05-09-2010 at 05:36 AM.