Quote:
Originally Posted by BUBBAS IGNITION
Man this discussion never quits.
The 35 Ford spec mfds is .36 mfd per the Ford service book. The IH200 and the FA54 is .25 which is slightly lower than spec .....
However the spec for the 42-48 Crab is .25mfds......
This difference is seen running on a distributor machine, i keep a .36 with leads and clips hanging there, see some arc on the primary points jumper the test .36 in the circuit and it will go away..........interesting ...  |
Are you using a 6 or 12v coil?