The Ford Barn - View Single Post

Rowdy · 10-13-2014, 10:37 AM

Dress the worn area with some fine grit emory cloth ( not the plumbers grade). Measure the worst of the worn area with a micrometer. I forget how much wear is acceptable and would have to look for that. Sleeve if necessary as mentioned above. Rod

10-13-2014, 10:37 AM	#3
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: Evaluating rear axles Dress the worn area with some fine grit emory cloth ( not the plumbers grade). Measure the worst of the worn area with a micrometer. I forget how much wear is acceptable and would have to look for that. Sleeve if necessary as mentioned above. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!