The Ford Barn - View Single Post

rich b · 10-05-2021, 11:13 AM

Something to watch out for when using those adapters; couple times I found that the adapter contacted the body of the master cylinder instead of seating on the brass insert. Faced off the body a bit so it seated.

I usually use the "oversize" tube nuts instead of the adapters when I can.

10-05-2021, 11:13 AM	#11
rich b Senior Member Join Date: May 2010 Location: Minnesota Posts: 1,827	Re: Master cylinder to brake line adapter Something to watch out for when using those adapters; couple times I found that the adapter contacted the body of the master cylinder instead of seating on the brass insert. Faced off the body a bit so it seated. I usually use the "oversize" tube nuts instead of the adapters when I can.