The Ford Barn - View Single Post

ponymare · 07-07-2019, 06:18 AM

Sounds like it doesn't have much or any compression from cyl's. being washed clean. Pull plugs, then pull the truck around the block in high gear. Put a ts of motor oil in each cyl. replace the plugs and pull I again in high gear, if getting fire it will start.

07-07-2019, 06:18 AM	#5
ponymare Senior Member Join Date: Sep 2014 Posts: 160	Re: 49 Flathead starting problem Sounds like it doesn't have much or any compression from cyl's. being washed clean. Pull plugs, then pull the truck around the block in high gear. Put a ts of motor oil in each cyl. replace the plugs and pull I again in high gear, if getting fire it will start.